Timber Housing Range

Movable timber chicken coop with enclosed run A traditional timber chicken tractor for a small backyard flock or rearing young birds. The Appletons Movable Chicken Coop combines a sheltered house and enclosed mesh run, with long wooden handles at each end for moving it to fresh grass. Appletons uses these coops to raise pullets to point of lay. Moving the coop regularly gives birds fresh ground to explore and lets previously used grass rest. It is also suitable for a mother hen with her young. Flock size and dimensions Capacity: three standard-size hens, or up to four with free-range access. Overall coop: 2m long × 0.9m wide × 0.75m high. House footprint: 1m × 0.9m. Run footprint: 1m × 0.9m. Allow additional outdoor space for free-ranging as appropriate to your flock. The stated capacity should not be treated as a recommendation to confine four adult hens permanently within the attached run. Access, nesting and cleaning Lift-up plywood roof panel for access to the house. Lift-up mesh roof panel for access to the run. Pop-hole between the house and run, with a door catch. Pop-hole from the run to the outside, with a door catch. Lift-out plywood house floor for easier cleaning. One removable plastic nest box. One removable roost/perch. The sheltered house has ventilation holes, while the run uses square welded wire mesh. The house has an apex-style plywood roof with a weatherproof strip. This model has a plywood roof, not the corrugated metal roof used on some other Appletons houses. Materials and finish Built with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber to balance practicality and affordability. The higher-grade plywood face is placed on the outside. Knots, small splits, filler and other minor surface blemishes can occur on the reverse face, and treatment marks may weather over time. This is practical animal housing rather than furniture-grade cabinetry. For a smoother finish, ask Appletons about dressed timber or higher-grade plywood upgrades before ordering. Thicker flooring or alternative materials may also be discussed and cost extra. Made to order and assembly options All Appletons timber housing is made to order. Production is booked once the order is confirmed and paid. Manufacture generally takes 5–15 working days, depending on workshop capacity; allow additional time for delivery. Kitset: the listed option recommended for national delivery. Panels are pre-built and flat-packed, with easy-to-follow assembly instructions. Non-kitset: the listed option recommended for local pickup. For the flat-packed option, plan for two people to assemble the coop on level ground and follow the supplied model-specific instructions. Flat-packed orders are shrink-wrapped before dispatch. Materials and small workshop refinements may vary between builds; if matching units are important, discuss this when ordering them together. Positioning and maintenance Choose level ground and position the solid side towards prevailing wind and rain while retaining ventilation. Check birds, water, feed and catches daily, including after moving the coop. An enclosed run is not a guarantee against every predator. You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish and extend useful life. Check fixings and oil moving parts as needed. Appletons estimates that maintained timber housing can last 15 years or more. This is not a guaranteed lifespan: exposure, local conditions and maintenance affect durability. Remove accumulated droppings and damp bedding regularly. Use the removable floor, perch and nest box for thorough cleaning, and clean before introducing young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Can I request untreated timber? Appletons can discuss untreated timber and plywood construction, which substantially increases cost. The shared timber-housing guidance notes that treated skids are still required where a model has a skid base. Confirm the available construction options for this coop before ordering.

Read more less

Deluxe raised timber hen house with optional enclosed run The Appletons Deluxe Hen House is a raised timber house for backyard layers, with external nest boxes for easy egg collection. Four sturdy legs lift the house above the ground, and a supplied ramp gives hens access through an opening and closing pop-hole. Collect eggs by lifting the outside nest-box lid, then lift the house roof when you need to inspect the interior. A removable perch and two-piece removable floor make routine cleaning easier. Capacity and dimensions Flock capacity: up to six heavy-breed hens or six commercial hybrids, such as Brown Shavers or Hylines, with daily free-range access. House dimensions: 1m wide × 1m deep × 1.15m high. External nest boxes: additional to the stated house dimensions. Optional fully enclosed run: 2.4m × 2.7m, with a height of 900mm. The flock capacity assumes daily free-ranging. Adding the optional run does not turn this capacity into a recommendation for permanent confinement within that run. House features and inclusions Raised house on four sturdy legs. Apex-style plywood roof with one lift-up panel for internal access. External laying box containing two nest boxes, accessed from outside for egg collection. Single 1m-long removable timber roost/perch. Two-piece removable floor for cleaning. Opening and closing pop-hole. Ramp supplied. Ventilation holes in the front panel, or in the side panel when purchased with a run. Choose the house alone or add a run Select Hen House only or Hen House + Fully Enclosed 900mm High Run (2.4m x 2.7m). The run is optional and is not included with the house-only configuration. The optional run sits off the front of the house and provides a contained outdoor area. The house and run are separate units, so each can be moved individually when relocating the setup. An enclosed run helps manage access and containment, but is not a guarantee against every predator. Appletons can also cut a slot in the run to accommodate its Easy Care Drinker, with most of the drinker outside and the drinking trough accessible inside. Ask about this adaptation when ordering; the drinker is not listed as a standard house inclusion. Materials and practical finish Built with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber to keep practical animal housing affordable. The higher-grade plywood face is placed outside. Minor blemishes such as knots, small splits and filler may be present on the reverse face, and treatment marks may weather over time. This is not a furniture-grade finish. Ask about higher-grade plywood, dressed timber or thicker flooring upgrades before ordering; these cost extra. This model has a plywood roof. Corrugated-metal roofing specifications and maintenance advice for other houses should not be assumed to apply. Made to order and flat-packed assembly Appletons timber housing is made to order, with production booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity. Delivery time is additional. The professionally built kitset design uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow assembly instructions. Plan for two people to assemble the house on level ground and follow the supplied model-specific instructions. Materials and small workshop refinements may vary between builds. If you want matching houses, discuss this when ordering them together. Positioning, painting and maintenance Site the house on level ground with the solid back towards prevailing wind and rain, retaining ventilation without exposing hens to excessive draughts. Allow space for the ramp, external nest boxes and access for roof lifting and cleaning. You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and can move or split over time. Painting, checking fixings and maintaining moving parts help protect the house. Repaint or restain as needed. Appletons estimates maintained timber housing can last 15 years or more. This is an estimate, not a guaranteed lifespan; exposure and maintenance affect durability. Cleaning and daily care Check food, water, ventilation and pop-hole operation daily. Remove droppings and damp bedding regularly, using the removable floor and perch for thorough cleaning. Clean before introducing young birds to a house previously used by older birds, and follow cleaning-product labels. Cleaning frequency depends on flock size, bedding and conditions. Do not wait for an annual clean if the floor becomes damp, dirty or smelly. Alternative timber requests If you prefer untreated timber and plywood, discuss available construction options with Appletons before ordering. Alternative materials substantially increase cost; confirm the specification for this raised model rather than assuming the skid-base details of other houses apply.

Read more less

Mobile raised timber chicken coop on wheels The Appletons Mobile Raised Chicken Coop combines a raised house, attached enclosed run and external nesting box in a movable timber setup. Chunky inflatable tyres with tread and long handles help you move it across a level surface, giving hens fresh ground to explore. Collect eggs from outside without opening the house, lift the roof for internal access, and use the front run door when tending the outdoor area. The space beneath the raised house provides an additional sheltered area for your chickens. Flock capacity and dimensions With free-range access: up to six hens, including heavy breeds. Without free-range access: Appletons recommends no more than three hens, depending on breed. Bantams: Appletons gives a guide of six to eight, depending on the birds and their space requirements. Coop dimensions, excluding handles: 2m long × 0.9m wide × 1.1m high to the apex. House footprint: 1.1m × 0.9m. External laying box: additional to these measurements. Allow extra space for the handles, external nesting box, roof lifting and access when planning your site. The six-hen capacity assumes access to free-range, not permanent confinement in the attached run. House, run and access features Raised house with an apex-style roof and ventilation holes. Enclosed run with square-welded wire mesh. Sheltered chicken area under the house. Lift-up house roof panel for internal access. Front run door panel for access to the run. Ramp and closable pop-hole between run and house. House pop-hole door opens inward and has a catch to hold it open. Closable outside-access pop-hole in the run door panel. Lift-out plywood house floors. Removable timber roost/perch for cleaning. Two-bay external laying box with outside access for egg collection. External weatherproof strip on the nesting box. Moving your coop The inflatable treaded tyres are designed for moving the coop on a level surface. Plan a suitable route and check clearances, allowing for handles and the external laying box. Regular relocation can give hens fresh ground and allow previously used areas to rest. Check doors, catches and the condition of the setup after moving it. The enclosed run helps with containment, but should not be treated as a guarantee against every predator. Optional drinker The Appletons Easy Care Drinker is shown as an optional accessory. Its positioning takes up little space in the run and provides access to water. It is not a standard included item. Materials and finish Built with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber for practical, affordable animal housing. The higher-grade plywood face is placed outside. Knots, small splits, filler and minor blemishes may be present on the reverse face, and treatment marks can weather over time. This is a practical housing finish rather than furniture-grade cabinetry. Ask before ordering about dressed timber, higher-grade plywood, thicker flooring or alternative-material requests. These upgrades cost extra. Do not assume the construction or roofing details of other timber models apply to this coop. Made to order, assembly and pickup Appletons timber housing is made to order, with production booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional. The coop is supplied as a professionally built flat-packed kitset for efficient shipping. Panels are pre-built, with easy-to-follow assembly instructions. Plan for two people to assemble it on level ground using the model-specific instructions. Flat-packed orders are shrink-wrapped before dispatch. For local customers, Appletons offers assembly at no extra cost. Arrange this with Appletons before pickup. Materials and small workshop refinements may vary between builds. If you want matching units, discuss this when ordering them together. Positioning, painting and maintenance Choose level ground, position the sheltered house against prevailing wind and rain, and retain good airflow without excessive draughts. Check feed, water, ventilation and bird access daily. You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish and extend useful life. Check fixings, tyres and moving parts, and oil moving parts as needed. Appletons estimates that maintained timber housing can last 15 years or more. This is not a guaranteed lifespan: weather exposure, site conditions and maintenance affect durability. Cleaning Remove droppings and damp bedding regularly. Use the lift-out floors, removable perch and lift-up roof access for thorough cleaning. Frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly. Clean before adding young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in your flock.

Read more less

Raised timber hen house you can move like a wheelbarrow The Appletons Wheelbarrow Hen House combines raised timber housing with long lifting handles and chunky inflatable tyres. Wheel it to a new position when needed, collect eggs from the external nesting box and lift the roof for access to the interior. Designed for hens with daily free-range access, this house offers removable cleaning components and a supplied access ramp. It fits through most standard gateways, but check your route and clearances before ordering. Flock capacity and dimensions Capacity: up to six heavy-breed hens or eight commercial hybrids with daily free-range access. House dimensions: 1.1m long × 0.8m wide × 1.15m high to the apex. External laying box: additional to the stated measurements. Allow extra room for the external laying box, handles, ramp and access for roof lifting. The stated capacity is for overnight housing with daily free-ranging, not permanent confinement inside the house. Features and inclusions Raised house on legs. Sturdy long handles at one end for lifting. Chunky inflatable tyres with tread for moving the house. Apex-style plywood roof with one lift-up panel for internal access. Ventilation holes in the front panel. Two removable timber roosts/perches for cleaning and inspection. Plywood floor removable in two pieces. External laying box containing two nest boxes. Outside nest-box access for egg collection. Opening and closing pop-hole. Ramp supplied. Moving and positioning Use the handles and wheels to relocate the house along a suitable route. Check gateway widths and terrain rather than relying on the house-body width alone. Site the house on level ground and check its stability and door operation after moving. Position the solid back towards prevailing wind and rain while retaining ventilation without excessive draughts. Provide suitable outdoor space for daily free-ranging or a separately arranged enclosure. An attached run is not listed as an inclusion for this product. Materials and finish Built with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber to keep practical animal housing affordable. The higher-grade plywood face is placed outside. Minor blemishes such as knots, small splits and filler may be present on the reverse face, and treatment marks may weather over time. This is practical animal housing, not a furniture-grade finish. Ask before ordering about dressed timber, higher-grade plywood, thicker flooring or alternative materials. These upgrades cost extra. This model has a plywood roof; metal-roof specifications for other models should not be assumed to apply. Made to order and assembly Appletons timber housing is made to order, with production booked after confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity. Delivery time is additional. The professionally built kitset uses pre-built panels, flat-packed and shrink-wrapped for dispatch, with easy-to-follow assembly instructions. Plan for two people to assemble the house on level ground and follow the supplied model-specific instructions. Materials and small workshop refinements may vary between builds. If matching houses are important, discuss this when ordering them together. Painting and maintenance You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish and extend useful life. Check fixings, tyres and moving parts, oil moving parts as needed, and repaint or restain when required. Appletons estimates that maintained timber housing can last 15 years or more. This is an estimate rather than a guaranteed lifespan: local conditions, weather exposure and maintenance affect durability. Cleaning and daily care Lift the roof for internal access and remove the two-piece floor and perches for cleaning and mite inspection. Remove droppings and damp bedding regularly. Cleaning frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly. Clean thoroughly before adding young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check your hens, food, water, ventilation and pop-hole operation daily.

Read more less

Raised Cubby timber hen house The Appletons Raised Cubby Hen House offers compact raised housing with external egg collection, a large access door and a folding two-tier roost. Its supplied timber ramp leads to a closable pop-hole, while the front mesh window provides light and ventilation. Collect eggs from outside, then open the large door and fold the roost against the side wall when it is time to clean. A removable litter-retaining doorstop helps keep wood shavings inside when the door is opened. Capacity and dimensions Capacity: up to eight heavy-breed hens or ten commercial hybrids with daily free-range access. House dimensions: 1.2m long × 1.2m deep × 1.8m high to the front of the roof. Leg height: 50cm. External nest boxes: additional to the stated dimensions. The capacity assumes daily access to free-range, not permanent confinement inside the house. Allow extra space for the ramp, external laying box and door opening, including room for cleaning access. Features and inclusions Raised timber house with a solid plywood floor. Corrugated galvanised iron roof with matching flashings at each end. Three separate nest compartments in one external laying box. Outside access to the nesting box for egg collection. Large access door for inspecting and cleaning the interior. Two-tier drop-down timber roost that folds away against the side wall. Square-welded mesh window in the front panel for ventilation and light. Opening and closing pop-hole, lockable at night. Timber ramp to the pop-hole included. Removable doorstop to help retain bedding. The solid floor supports the use of a managed deep-litter system. Keep bedding dry and inspect the floor and litter regularly. A closed house is not a guarantee against every predator. Nesting setup Three laying compartments are provided. Add suitable bedding such as untreated wood shavings or hay, or use separately purchased nest liners. Maintain enough clean bedding to cushion eggs. Nest liners and nest or fake eggs are optional accessories, not listed standard inclusions. Optional roof and gutter upgrades The standard roof and flashings are galvanised corrugated iron. A Colorsteel Endura roof and matching flashings can be requested to coordinate with other buildings and reduce the glare of galvanised roofing. Confirm the available colour and additional cost with Appletons before ordering. A rolled rear gutter is also an optional upgrade, available in galvanised iron or a requested Colorsteel Endura colour. It covers the exposed corrugated edge and guides water towards the gutter ends. It is not a standard inclusion. Materials and practical finish Built with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber for practical, affordable animal housing. The higher-grade plywood face is placed outside. Minor blemishes such as knots, small splits and filler may be present on the reverse face, and treatment marks can weather over time. This is practical animal housing rather than a furniture-grade finish. Ask about dressed timber, higher-grade plywood, thicker flooring or alternative materials before ordering. These upgrades cost extra. Made to order and assembly Appletons timber housing is made to order. Production is booked after order confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity; delivery time is additional. The professionally built kitset uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow assembly instructions. Plan for two people to assemble the house on level ground and follow the supplied model-specific instructions. Materials and small workshop refinements may vary between builds. If matching houses are important, discuss this when ordering them together. Positioning and maintenance Position solid walls towards prevailing wind and rain, with the front mesh panel facing the sun where suitable. Retain ventilation without excessive draughts and ensure convenient access to the external nest boxes and large door. You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish. Check fixings and moving parts, oil moving parts as needed, and repaint or restain when required. Coastal salt exposure, moisture and environmental conditions can accelerate roofing corrosion. Appletons recommends regularly washing galvanised or Colorsteel roofing with potable water in coastal or salty environments. Appletons estimates that maintained timber housing can last 15 years or more. This is an estimate, not a guaranteed lifespan; exposure and maintenance affect durability. Cleaning and daily care Use the large access door, folding roost and removable doorstop for cleaning. Remove droppings and damp bedding regularly. Frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly. Clean thoroughly before introducing young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check hens, food, water, ventilation and pop-hole operation daily.

Read more less

Cubby timber hen house on skidsThe Appletons Cubby Hen House is compact timber housing built on skids for towing around the paddock. It combines external egg collection, a large access door and a folding two-tier roost with a solid plywood floor and a front mesh window for ventilation and light.Lift the external laying-box lid to collect eggs without entering the house. For cleaning, open the large door, remove the bedding-retaining doorstop and fold the roost against the side wall to clear the floor area.Capacity and dimensions Capacity: up to eight heavy-breed hens or ten commercial hybrids with daily free-range access. House dimensions: 1.2m long × 1.2m deep × 1.3m high to the front of the roof. External nest boxes: additional to the stated dimensions. Base: skids for relocating the house around the paddock. The capacity assumes daily access to free-range, not permanent confinement inside the house. This is the lower Cubby on skids, not the separate Raised Cubby model. Allow additional room for the external laying box, door opening and cleaning access.Features and inclusions Solid plywood floor. Corrugated galvanised iron roof with matching flashings at each end. Three separate nest compartments in one external laying box. Outside access to the laying box for egg collection. Large access door. Two-tier drop-down timber roost that folds away against the side wall. Square-welded mesh window on the front panel for ventilation and light. Opening and closing chicken pop-hole, lockable at night. Removable doorstop to help stop wood shavings spilling out when the access door is opened. The solid floor supports a managed deep-litter system. Keep litter dry and inspect it regularly. A closable house is not a guarantee against every predator.External nesting compartmentsThree easy-to-reach laying compartments are provided. Fill them with suitable bedding such as untreated wood shavings or hay, or use separately purchased nest liners. Refresh bedding regularly to cushion eggs and keep the nests clean. Nest liners and nest or fake eggs are optional accessories, not listed standard inclusions.Optional roof colour and rolled gutterThe standard roof and flashings are galvanised corrugated iron. You can request a Colorsteel Endura roof and matching flashings to coordinate with other buildings and reduce glare. Discuss available colours and the additional cost with Appletons before ordering.A rolled rear gutter is an optional addition, available in galvanised iron or a requested Colorsteel Endura colour. It covers the exposed corrugated edge and guides water towards the gutter ends. It is not a standard inclusion.Materials and finishBuilt with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber to keep practical animal housing affordable.The higher-grade plywood face is placed outside. Knots, small splits, filler and minor blemishes may appear on the reverse face, and treatment marks can weather over time. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood, thicker flooring or alternative materials. These upgrades cost extra. Untreated timber and plywood construction can be discussed, but substantially increases cost; treated skids are still required on the base.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity; delivery time is additional.The professionally built kitset uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow assembly instructions. Plan for two people to assemble the house on level ground, following the supplied model-specific instructions.Materials and small workshop refinements may vary between builds. If matching houses are important, discuss this when ordering them together.Positioning and maintenanceChoose level ground, position solid walls towards prevailing wind and rain, and face the front mesh panel towards the sun where appropriate. Retain ventilation without excessive draughts and ensure convenient access to the external nest boxes and large door. Check stability and door operation after relocating the house.You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish. Check fixings and moving parts, oil moving parts as needed, and repaint or restain when required.Coastal salt exposure, moisture and environmental conditions can accelerate roofing corrosion. Appletons recommends regularly washing galvanised or Colorsteel roofing with potable water in coastal or salty environments.Appletons estimates that maintained timber housing can last 15 years or more. This is an estimate, not a guaranteed lifespan: exposure and maintenance affect durability.Cleaning and daily careUse the access door, folding roost and removable doorstop for cleaning. Remove accumulated droppings and damp bedding regularly. Frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly.Clean thoroughly before adding young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check hens, food, water, ventilation and pop-hole operation daily.

Read more less

Walk-in timber hen house with batten detailingThe Appletons Batten Hen House combines a distinctive batten finish with practical walk-in access, external egg collection and a folding two-tier roost. Built on skids for towing around the paddock, it provides overnight housing for a flock with daily free-range access.Collect eggs through the outside laying-box lid, then step through the person-sized door for inspection and cleaning. Fold the roost against the back wall and remove the bedding-retaining doorstop to clear the floor for maintenance.Capacity and dimensions Capacity: up to 16 heavy-breed hens or 18 commercial hybrids with daily free-range access. House dimensions: 2.4m long × 1.2m deep × 1.8m high at the front. External laying box: additional to these measurements. Base: skids for relocation around the paddock. The stated capacity assumes daily free-ranging, not permanent confinement inside the house. Allow additional room for the laying box, door opening and access for cleaning, including wheelbarrow access where required.Features and inclusions Batten detailing on the timber house. Solid plywood floor, suitable for a managed deep-litter system. Single-pitch corrugated galvanised iron roof with matching end flashings. Four separate nest compartments in one external laying box. Outside laying-box access for easy egg collection. Person-sized access door. Two-tier drop-down timber roost that folds against the back wall for cleaning. Square-welded mesh window in the front panel for ventilation and light. Opening and closing chicken pop-hole, lockable at night. Removable doorstop to help retain wood shavings when the access door is opened. The supplied drop-down roost is the same length as the bay of four laying boxes. The shorter roost shown in some interior photographs is not representative of the stated full-length arrangement.Pop-hole placement and optional extra accessAppletons can position the chicken pop-hole where you want it; discuss the location before manufacture. An additional pop-hole can be requested if you want to alternate access between a run and another free-range area. This is an optional adaptation, not a standard second opening.A closable house helps manage nighttime access but is not a guarantee against every predator. Arrange suitable outdoor space or a separate enclosure for your flock.Nesting setupFour laying compartments are provided. Add suitable bedding such as untreated wood shavings or hay, or use separately purchased nest liners. Refresh bedding regularly to keep nests clean and cushion eggs. Nest liners and nest or fake eggs are optional accessories, not listed standard inclusions.Optional roof colour and rolled gutterThe standard roof and flashings are galvanised corrugated iron. A Colorsteel Endura upgrade can be requested to coordinate with other buildings and reduce glare. Confirm available colours and additional cost with Appletons before ordering.A rolled gutter along the rear roof edge is optional, in galvanised iron or a requested Colorsteel Endura colour. It covers the exposed corrugated edge and guides water towards the gutter ends. It is not a standard inclusion.Materials and practical finishBuilt with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber to keep practical animal housing affordable.The higher-grade plywood face is placed outside. Knots, small splits, filler and minor blemishes may appear on the reverse face, and treatment marks may weather over time. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood or thicker flooring. These upgrades cost extra. Untreated timber and plywood construction can also be discussed, but substantially increases cost; treated skids are still required on the base.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity; delivery time is additional.The professionally built kitset uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow assembly instructions. Plan for two people to assemble the house on level ground, following the supplied model-specific instructions.Materials and small workshop refinements may vary between builds. If matching houses are important, discuss this when ordering them together.Positioning and maintenanceChoose level ground and position solid walls towards prevailing wind and rain. Face the front mesh panel towards the sun where appropriate, retaining ventilation without excessive draughts. Keep daily egg collection and person-door access convenient. Check stability and door operation after relocating the house.You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish. Check fixings and moving parts, oil moving parts as needed, and repaint or restain when required.Coastal salt exposure and moisture can accelerate roofing corrosion. Appletons recommends regularly washing galvanised or Colorsteel roofing with potable water in coastal or salty environments.Appletons estimates that maintained timber housing can last 15 years or more. This is an estimate, not a guaranteed lifespan: exposure and maintenance affect durability.Cleaning and daily careUse the person-sized door, folding roost and removable doorstop for cleaning. Remove droppings and damp bedding regularly. Frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly.Clean thoroughly before adding young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check hens, food, water, ventilation and pop-hole operation daily.

Read more less

Mini Apex walk-in timber hen houseThe Appletons Mini Apex is a compact version of the Apex Hen House, combining person-sized access with external egg collection and two removable timber perches. Built on skids for towing around the paddock, it offers a practical layout for inspecting your flock and cleaning the house.Collect eggs through the outside laying-box lid, then use the wide access door to tend bedding and remove the perches for cleaning. The front mesh window brings light and airflow into the house.Capacity and dimensions Capacity: up to ten standard-size hens or eight heritage heavy-breed hens, or a breeding group, with daily free-range access. House footprint: 1.2m long × 1.2m deep. Internal apex height: 1.8m. External apex height: 2m. External nest boxes: additional to these measurements. Appletons describes six hens as a comfortable flock size for this model. The maximum capacities depend on breed and daily free-range access, not permanent confinement inside the house. Allow additional space for the laying box, door opening and cleaning access.Features and inclusions Skid base for relocating the house. Solid plywood floor, suitable for a managed deep-litter system. Corrugated galvanised iron roof with matching end flashings. Standard rolled gutter on the front mesh side. Wide person-sized access door. Three separate nest compartments in one external laying box. Outside laying-box access for egg collection. Two removable single timber roosts/perches; use one or both according to flock needs. Square-welded mesh window on the front panel for ventilation and light. One opening and closing chicken pop-hole. Timber doorstop to help retain wood shavings. Keep bedding dry and inspect the floor and litter regularly. A closable house is not a guarantee against every predator.House and optional run configurationsChoose the house alone, the house with an open-top run, or the house with a fully enclosed run. The listed optional runs measure approximately 3m long × 1.2m wide × 1.9m high. A run is not included with the house-only option.An open-top run and a fully enclosed run provide different levels of containment. Choose according to your site and flock, while retaining suitable daily free-range access for the stated house capacity.Pop-hole placement and optional extra accessAppletons can position the supplied pop-hole where you want it; discuss placement before manufacture. An additional pop-hole can be requested to alternate access between a run and another outdoor area. The second opening is optional, not a standard inclusion.Nesting setupThree laying compartments are provided. Add suitable bedding such as untreated wood shavings, or use separately purchased nest liners. Top up bedding regularly to cushion eggs. Nest liners and nest or fake eggs are optional accessories, not listed standard inclusions.Optional roof colour and additional gutterThe standard roof, flashings and ridge capping are galvanised corrugated iron. A Colorsteel Endura upgrade can be requested to coordinate with other buildings and reduce glare. Confirm available colours and additional cost with Appletons before ordering.The front rolled gutter is standard. A second rolled gutter can be requested for the rear roof edge, in galvanised iron or a requested Colorsteel Endura colour. Rolled gutters cover the exposed corrugated edge and guide water towards the ends. The additional rear gutter is optional.Materials and finishBuilt with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber to keep practical animal housing affordable.The higher-grade plywood face is placed outside. Knots, small splits, filler and minor blemishes may appear on the reverse face, and treatment marks can weather over time. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood or thicker flooring. These upgrades cost extra. Untreated timber and plywood construction can be discussed but substantially increases cost; treated skids are still required on the base.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity; delivery time is additional.The professionally built kitset uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow assembly instructions. Plan for two people to assemble the house on level ground, following the supplied model-specific instructions.Materials and small workshop refinements may vary between builds. If matching houses are important, discuss this when ordering them together.Positioning and maintenanceChoose level ground and position solid walls towards prevailing wind and rain. Face the front mesh panel towards the sun where appropriate, retaining airflow without excessive draughts. Keep egg collection and person-door access convenient, with room for cleaning equipment. Check stability and door operation after relocating the house.You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish. Check fixings and moving parts, oil moving parts as needed, and repaint or restain when required.Coastal salt exposure and moisture can accelerate roofing corrosion. Appletons recommends regularly washing galvanised or Colorsteel roofing with potable water in coastal or salty environments.Appletons estimates that maintained timber housing can last 15 years or more. This is an estimate, not a guaranteed lifespan: exposure and maintenance affect durability.Cleaning and daily careUse the wide access door and removable perches for cleaning and inspection. Remove droppings and damp bedding regularly. Frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly.Clean thoroughly before adding young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check hens, food, water, ventilation and pop-hole operation daily.

Read more less

Apex walk-in timber hen houseThe Appletons Apex Hen House is a spacious gable-style house with person-sized access, external egg collection and three removable timber perches. Built on skids for towing around the paddock, it provides practical overnight housing for a flock with daily free-range access.Collect eggs from outside, then step through the access door to inspect bedding and remove the perches for cleaning. A front mesh window provides ventilation and light, while the solid plywood floor supports a managed deep-litter system.Capacity and dimensions Capacity: up to 18 heavy-breed hens or 20 commercial hybrids, such as Brown Shavers or Hylines, with daily free-range access. House footprint: 2.4m long × 1.2m deep. Internal apex height: 1.8m. External apex height: 2m. External nest boxes: additional to the stated measurements. The stated capacity assumes daily free-ranging, not permanent confinement inside the house or an optional run. Allow additional room for the laying box, door opening and cleaning equipment.Features and inclusions Skid base for relocating the house. Solid plywood floor. Corrugated galvanised iron roof with matching end flashings. Standard rolled gutter on the front mesh side. Person-sized access door. Three separate nest compartments in one external laying box. Outside laying-box access for egg collection. Three removable timber roosts/perches. Square-welded mesh window in the front panel for ventilation and light. One opening and closing chicken pop-hole, lockable at night. Doorstop to help retain wood shavings. Optional standard and extended runsChoose the house alone, or add an open-top or fully enclosed standard or extended run. A run is not included with the house-only option. Standard run: 2.6m long × 2.4m wide × 1.8m high. Extended run: 5m long × 2.4m wide. Top options: open-top or fully enclosed with timber and mesh top panels. The optional run can be arranged off the front or back of the house. The standard run's person-access door can be positioned in any panel. Keep the external laying box accessible from outside the run and discuss the layout before ordering.The extended run adds two panels to increase its length to 5m. The fully enclosed arrangement includes top panels and an additional panel between the house's rolled gutter and the run roof panel. Enclosed runs help with containment but are not a guarantee against every predator.A level surface is needed for run assembly. Ask Appletons about a customised layout if the listed configurations do not suit your site.Pop-hole placement and additional accessAppletons can position the supplied chicken pop-hole where you want it; discuss placement before manufacture. An additional pop-hole can be requested if you want to alternate access between a run and a separate paddock or garden area. Some photographs show two openings, but the standard house specification includes one.External nesting and removable perchesThree laying compartments are provided. Add suitable bedding such as untreated wood shavings, or use separately purchased nest liners. Keep nesting material clean and topped up to cushion eggs.The three timber perches are removable for cleaning and inspection. Follow the supplied guidance for securing them in position. Nest liners and nest or fake eggs are optional accessories, not standard inclusions.Optional roof colour and rear gutterThe standard roof, flashings and ridge capping are galvanised corrugated iron. A Colorsteel Endura upgrade can be requested to coordinate with other buildings and reduce glare. Confirm the available colours and additional cost with Appletons before ordering.The front rolled gutter is standard. A second rolled gutter can be requested for the rear roof edge, in galvanised iron or a requested Colorsteel Endura colour. Rolled gutters cover the exposed corrugated edge and guide water towards the ends. The rear gutter is optional.Materials and practical finishBuilt with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber to keep practical animal housing affordable.The higher-grade plywood face is placed outside. Knots, small splits, filler and minor blemishes may appear on the reverse face, and treatment marks can weather over time. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood or thicker flooring. These upgrades cost extra. Untreated timber and plywood construction can be discussed but substantially increases cost; treated skids are still required on the base.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity; delivery time is additional.The professionally built kitset uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow assembly instructions. Plan for two people to assemble the house on level ground, following the supplied model-specific instructions.Materials and small workshop refinements may vary between builds. If matching houses are important, discuss this when ordering them together.Positioning and maintenancePosition solid walls towards prevailing wind and rain and face the front mesh panel towards the sun where appropriate. Retain airflow without excessive draughts and ensure convenient access to nest boxes and the person door. Check stability and door operation after relocating the house.You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish. Check fixings and moving parts, oil moving parts as needed, and repaint or restain when required.Coastal salt exposure and moisture can accelerate roofing corrosion. Appletons recommends regularly washing galvanised or Colorsteel roofing with potable water in coastal or salty environments.Appletons estimates that maintained timber housing can last 15 years or more. This is an estimate, not a guaranteed lifespan: exposure and maintenance affect durability.Cleaning and daily careUse the access door and removable perches for cleaning. Remove droppings and damp bedding regularly. Frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly.Clean thoroughly before adding young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check hens, food, water, ventilation and pop-hole operation daily.

Read more less

Duo Apex: two timber hen houses under one roofThe Appletons Duo Apex houses two flocks side by side, with a separate access door, external laying box and chicken exit for each compartment. A third pop-hole in the central divider connects the two sides, allowing flexible use as two smaller houses or linked housing.Keep separate groups alongside each other, collect eggs from outside and fold the two-tier roosts against the walls for cleaning. The layout can support flock introductions, but introductions still require careful supervision and appropriate management.Capacity and dimensions Capacity per compartment: up to ten commercial hybrids or eight heavy-breed hens, or a breeding group, with daily free-range access. Overall house footprint: 2.4m long × 1.2m deep. Each compartment: 1.2m × 1.2m, with an internal apex height of 1.8m. Overall internal apex height: 1.8m. External apex height: 2m. External nest boxes: additional to these measurements. The detailed breed-specific capacity above assumes daily free-range access, not permanent confinement inside either compartment or an optional run. Allow additional space for laying boxes, both end doors and cleaning access.Features and inclusions Skid base for towing the house around the paddock. Solid plywood floor, suitable for a managed deep-litter system. Corrugated galvanised iron roof with matching end flashings. Standard rolled gutter on the front mesh side. Two person-sized doors, one at each end for access to the respective compartment. Three nest compartments in an external laying box for each side: six nest compartments in total. Outside egg collection. Two-tier hinged drop-down roost units that fold flat against the wall for cleaning. Square-welded mesh front windows for ventilation and light. One opening and closing outside-access chicken pop-hole per compartment. A third connecting pop-hole in the middle divider panel. Two timber doorstops to help retain wood shavings. Flexible layout and chicken accessThe central connecting pop-hole lets birds move between compartments when managed as linked housing. Keep the sides separated when your flock-management plan requires separate groups. Each compartment has its own outside-access pop-hole; discuss preferred placement with Appletons before manufacture.Additional outside-access pop-holes can be requested to alternate access between runs and other outdoor areas. These are optional adaptations beyond the standard two external openings and one connecting opening. A closable house is not a guarantee against every predator.Optional runsChoose the house alone or an open-top or fully enclosed run configuration. The listed choices include standard, double, extended and double-extended arrangements. Runs are not included with the house-only option. Standard run: 2.6m long × 2.4m wide × 1.9m high. Extended run: 5m long × 2.4m wide × 1.9m high. Double run: a double arrangement shown with the 2.6m × 2.4m × 1.9m run specification; confirm the complete layout and footprint with Appletons. Double extended: a double arrangement with runs extended to 5m; confirm the complete layout before ordering. Runs can be arranged for access from the front or rear. Discuss door locations, nest-box access and which compartment connects to which outdoor area before manufacture. The pictured customised setup with rear nest boxes is a layout example, not a promise that every order has that arrangement.Fully enclosed versions include timber and mesh top panels. The extended enclosed design includes a small panel between the rolled gutter and the top roof panel. These improve containment without guaranteeing exclusion of every predator. Use level ground for assembly and provide appropriate outdoor access for the stated house capacity.Nesting and cleaning accessEach side has three easy-to-reach laying compartments. Add suitable bedding such as untreated wood shavings or hay, or use separately purchased nest liners. Keep nesting material clean and topped up to cushion eggs. Nest liners and nest or fake eggs are optional accessories.The two-tier roost units are wall-hinged and supported by feet on the floor. Fold them against the wall for easier cleaning. Keep bedding dry and inspect the litter and floor regularly.Optional roof colour and rear gutterThe standard roof, flashings and ridge capping are galvanised corrugated iron. A Colorsteel Endura upgrade can be requested to coordinate with other buildings and reduce glare. Confirm available colours and additional cost with Appletons.The front rolled gutter is standard. A second gutter can be requested for the rear roof edge, in galvanised iron or a requested Colorsteel Endura colour. Rolled gutters cover the exposed corrugated edge and guide water towards the ends. The rear gutter is optional.Materials and finishBuilt with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber for practical, affordable animal housing.The higher-grade plywood face is placed outside. Minor blemishes such as knots, small splits and filler may appear on the reverse face, and treatment marks can weather over time. This is not a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood or thicker flooring. These upgrades cost extra. Untreated timber and plywood construction can be discussed but substantially increases cost; treated skids are still required on the base.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity; delivery time is additional.The professionally built kitset uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow instructions. Plan for two people to assemble it on level ground, following the model-specific instructions. Materials and small workshop refinements may vary between builds; discuss matching units when ordering them together.Positioning and maintenancePosition solid walls towards prevailing wind and rain and face the front mesh panel towards the sun where appropriate. Retain airflow without excessive draughts. Leave convenient access to both doors and laying boxes. Check stability and door operation after moving the house.You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish. Check fixings and moving parts, oil moving parts as needed, and repaint or restain when required.Coastal salt exposure and moisture can accelerate roofing corrosion. Appletons recommends regularly washing galvanised or Colorsteel roofing with potable water in coastal or salty environments.Appletons estimates maintained timber housing can last 15 years or more. This is an estimate, not a guaranteed lifespan; exposure and maintenance affect durability.Daily careRemove droppings and damp bedding regularly. Cleaning frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly. Clean thoroughly before introducing young birds to housing previously used by older birds.Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check birds, food, water, ventilation and pop-hole operation daily in both compartments.

Read more less

Classic walk-in timber hen houseThe Appletons Classic Hen House combines a spacious walk-in layout with a front mesh window for light and ventilation. External egg collection, three removable timber perches and a choice of person-door placement make everyday chicken care and cleaning practical.Collect eggs from the outside laying-box lid, then step through the person-sized door to tend bedding and inspect the interior. Built on skids, the house can be towed to a new position around the paddock.Capacity and dimensions Capacity: up to 18 heavy-breed hens or 20 commercial hybrids, such as Brown Shavers or Hylines, with daily free-range access. House dimensions: 2.4m long × 1.2m deep × 1.8m high at the front. External nest boxes: additional to these measurements. The stated capacity assumes daily free-ranging, not permanent confinement inside the house or an optional run. Allow extra space for the laying box, opening the person door and cleaning equipment.Features and inclusions Skid base for relocating the house. Solid plywood floor. Corrugated galvanised iron roof with matching end flashings. Standard rolled gutter on the front mesh side. Square-welded mesh front window for ventilation and light. Person-sized access door. One opening and closing chicken pop-hole, lockable at night. Three separate nest compartments in one external laying box. Outside access to the laying box for egg collection. Three removable timber roosts/perches for cleaning. Choose your door layoutThe person-access door can be positioned in an end panel or in the front mesh panel. Discuss your preferred layout with Appletons before manufacture. Door in the end: useful when attaching a run at the front and retaining house access without entering the run. Door in the front: places person access through the front mesh panel. Plan door clearance and external nest-box access around your site. Some layout photographs show an additional pop-hole under the laying box; that second opening is an optional adaptation, not a standard inclusion.Optional runsChoose the house alone or add an open-top or fully enclosed standard or extended run. A run is not included with the house-only option. Standard run: 2.4m long × 2.4m wide × 1.9m high. Extended run: 4.8m long × 2.4m wide × 1.9m high. Top options: open-top or fully enclosed with mesh top panels. The run can be attached at the front or rear. Appletons suggests an end-panel house door for the extended-run setup. Custom run designs can be discussed to suit the site. The run photographs on the page show an Apex house as an illustration, not the Classic house itself.Runs help manage access to gardens and provide contained outdoor space. A mesh top can help contain lighter breeds and deter visiting birds, but is not a guarantee against every predator or wild bird. Provide appropriate daily free-range access for the stated house capacity and assemble on level ground.Pop-hole placement and additional accessAppletons can position the supplied chicken pop-hole where you want it. An additional pop-hole can be requested if you want to alternate access between a run and another paddock or garden area. Confirm placement and additional cost before manufacture.Nesting and removable perchesThree nest compartments are provided. Add suitable clean bedding, or use separately purchased nest liners, and top up bedding regularly to cushion eggs. Nest liners and nest or fake eggs are optional accessories.All three timber perches are removable for cleaning. Follow the supplied guidance for securing them when in use.Optional roof colour and rear gutterThe standard roof and flashings are galvanised corrugated iron. A Colorsteel Endura upgrade can be requested to coordinate with other buildings and reduce glare. Confirm available colours and additional cost with Appletons.The front rolled gutter is standard. A second rolled gutter can be requested for the rear roof edge, in galvanised iron or a requested Colorsteel Endura colour. Rolled gutters cover the exposed corrugated edge and guide water towards the ends. The rear gutter is optional.Materials and finishBuilt with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber for practical, affordable animal housing.The higher-grade plywood face is placed outside. Knots, small splits, filler and minor blemishes may appear on the reverse face, and treatment marks can weather over time. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood or thicker flooring. These upgrades cost extra. Untreated timber and plywood construction can be discussed but substantially increases cost; treated skids are still required on the base.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity; delivery time is additional.The professionally built kitset uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow assembly instructions. Plan for two people to assemble the house on level ground, following the model-specific instructions.Materials and small workshop refinements may vary between builds. If matching houses are important, discuss this when ordering them together.Positioning and maintenanceChoose level ground, position solid walls towards prevailing wind and rain and face the front mesh panel towards the sun where appropriate. Retain airflow without excessive draughts. Leave convenient access for eggs and cleaning. Check stability and door operation after relocating the house.You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish. Check fixings and moving parts, oil moving parts as needed, and repaint or restain when required.Coastal salt exposure and moisture can accelerate roofing corrosion. Appletons recommends regularly washing galvanised or Colorsteel roofing with potable water in coastal or salty environments.Appletons estimates that maintained timber housing can last 15 years or more. This is an estimate, not a guaranteed lifespan; exposure and maintenance affect durability.Cleaning and daily careUse the person-access door and removable perches for cleaning. Remove droppings and damp bedding regularly. Frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly.Clean thoroughly before adding young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check birds, food, water, ventilation and pop-hole operation daily.

Read more less

Premier large walk-in timber hen houseThe Appletons Premier Hen House offers a 2.4m × 2.4m footprint for a larger laying flock, with person-sized access, external egg collection and four removable single-rail perches. Built on skids for towing around the paddock, it combines a solid plywood floor with a front mesh window for light and ventilation.Collect eggs from outside, then enter through the large door to inspect bedding and remove the perches for cleaning. Six nest compartments are arranged at one low level, with their position agreed before manufacture.Capacity and dimensions Capacity: approximately 40 heavy-breed hens or up to 50 commercial hybrids, such as Brown Shavers or Hylines, with daily free-range access. House footprint: 2.4m long × 2.4m deep. Internal apex height: 1.8m. External height: approximately 2.6m from ground to roof top. External laying boxes: additional to the stated measurements. The stated capacity assumes daily free-ranging, not permanent confinement inside the house or an optional run. Allow extra space for laying boxes, the person door and cleaning equipment.Features and inclusions Skid base for relocating the house. Solid plywood floor. Galvanised corrugated iron apex roof with matching end flashings. Rolled gutters on both roof sides as specified in the Premier feature list. Large person-sized access door. Six nest compartments, all at one low level, with outside egg collection. Four removable single-rail timber perches supported on side rails. Square-welded mesh front window for ventilation and light. Front mesh opening approximately 60cm high, with the panel described as roughly one-third mesh and two-thirds plywood. One opening and closing chicken pop-hole. The single-rail perches can be added or removed according to the birds using the house. This is not a tiered drop-down roost arrangement. Follow the supplied guidance for setup and securing components.Layout and chicken accessThe laying boxes can be positioned on any of the three solid panels. Agree their location with Appletons before manufacture, keeping external egg collection convenient and clear of any run.An additional pop-hole can be requested if you want to alternate access between a run and another paddock or garden area. It is an optional adaptation beyond the standard single opening. A closable house is not a guarantee against every predator.Optional standard and extended runsChoose the house alone or add an open-top or fully enclosed standard or extended run. A run is not included with the house-only option. Standard run: 2.6m long × 2.4m wide × 1.9m high. Extended run: approximately 5m long × 2.4m wide × 1.9m high. Top options: open-top or fully enclosed with mesh top panels. The standard run attaches at the front, with its door panel positioned on either side. Its structure uses three full-sized screw-together panels and two smaller connecting panels. The extended run adds two panels for more outdoor space.Assemble on a level surface and discuss the layout before ordering. The run photographs on the product page show an Apex house as an illustration, not the Premier house itself. Runs help with containment and garden access management, but do not guarantee exclusion of every predator or wild bird. Provide suitable daily free-range access for the stated house capacity.Nesting setupSix nest compartments are provided. Add suitable clean bedding or separately purchased nest liners, and maintain enough nesting material to cushion eggs. Nest liners and nest or fake eggs are optional accessories, not standard inclusions.Optional roof colourThe standard roof and flashings are galvanised corrugated iron. A Colorsteel Endura upgrade can be requested to coordinate with other buildings and reduce glare. Confirm available colours and additional cost with Appletons before ordering. The Premier-specific feature list states rolled gutters on both sides, so a second standard gutter is not presented as an extra purchase here.Materials and practical finishBuilt with H4-treated timber and H3.2-treated plywood. Appletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber for practical, affordable animal housing.The higher-grade plywood face is placed outside. Knots, small splits, filler and minor blemishes may appear on the reverse face, and treatment marks can weather over time. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood or thicker flooring. These upgrades cost extra. Untreated timber and plywood construction can be discussed but substantially increases cost; treated skids are still required on the base.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity; delivery time is additional.The professionally built kitset uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow instructions. Plan for two people to assemble it on level ground, following the model-specific instructions.Materials and small workshop refinements may vary between builds. If matching houses are important, discuss this when ordering them together.Positioning and maintenanceChoose level ground and position solid walls towards prevailing wind and rain. Face the mesh front towards the sun where appropriate, retaining airflow without excessive draughts. Keep laying boxes and person-door access convenient, with room for cleaning equipment. Check stability and door operation after relocating the house.You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish. Check fixings and moving parts, oil moving parts as needed, and repaint or restain when required.Coastal salt exposure and moisture can accelerate roofing corrosion. Appletons recommends regularly washing galvanised or Colorsteel roofing with potable water in coastal or salty environments.Appletons estimates maintained timber housing can last 15 years or more. This is an estimate, not a guaranteed lifespan; exposure and maintenance affect durability.Cleaning and daily careUse the large access door and removable perches for cleaning. Remove droppings and damp bedding regularly. Frequency depends on flock size, bedding and conditions; clean promptly if the floor becomes damp, dirty or smelly.Clean thoroughly before introducing young birds to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check hens, food, water, ventilation and pop-hole operation daily.

Read more less

Cubby timber duck house on skidsThe Appletons Cubby Duck House is compact enclosed housing for ducks or young poultry at night. A solid plywood floor, ventilated front panel and closable pop-hole combine sheltered accommodation with practical access for daily care.The included ramp leads to the birds’ pop-hole. Open the large access door for inspecting bedding and cleaning, and use the skid base to relocate the house around the paddock when needed.Dimensions House: 1.2m long × 1.2m deep × 1.3m high to the front of the roof. Base: skids for towing. Allow extra space for the ramp and opening the access door. Choose flock size according to bird size and management requirements; a numerical duck capacity is not specified for this model. Chicken capacities from the Cubby Hen House do not apply.Features and inclusions Professionally built kitset using pre-built panels. H4-treated timber and H3.2-treated plywood. Skid base for relocation. Large door for access and cleaning. Square-welded mesh in the front panel for ventilation. Solid plywood floor. Corrugated iron roof with matching side flashings. Opening and closing drop-down pop-hole for duck or chicken access. Ramp included. The access door and pop-hole can be closed at night while the mesh front retains ventilation. Check closures and the condition of the house regularly; enclosed housing is not a guarantee against every predator.Optional upgradesA matching Colorsteel Endura roof can be requested to coordinate with other buildings. Discuss the available colour and additional cost with Appletons before ordering.A rolled rear gutter is optional. It covers the exposed rear corrugated edge and helps guide water towards the gutter ends rather than along a dripline. Towing lugs can also be added for easier relocation. The gutter and towing lugs are additions, not listed standard inclusions.Materials and finishAppletons’ standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber for practical, affordable animal housing. The higher-grade plywood face is placed outside. Knots, small splits, filler and minor blemishes may be present on the reverse face, and treatment marks can weather over time.This is practical animal housing rather than a furniture-grade finish. Ask before ordering about higher-grade plywood, dressed timber or thicker flooring. These upgrades cost extra.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, depending on workshop capacity; delivery time is additional.The kitset uses pre-built panels, supplied flat-packed and shrink-wrapped with easy-to-follow assembly instructions. Plan for two people to assemble the house on level ground, following the model-specific instructions.Positioning and maintenanceChoose level ground and position the solid walls towards prevailing wind and rain, retaining ventilation without excessive draughts. Keep the ramp and access door clear. Check stability and door operation after relocating the house.You can paint or stain the timber. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Painting and regular maintenance help protect the finish. Check fixings and moving parts, oil moving parts as needed, and repaint or restain when required.Cleaning and daily careUse the large door for access to the floor. Keep bedding dry, remove droppings and damp material regularly, and clean promptly if the floor becomes wet, dirty or smelly. Cleaning frequency depends on the birds, bedding and conditions.Clean thoroughly before introducing young poultry to housing previously used by older birds. Follow cleaning-product labels and seek appropriate advice after illness in the flock. Check birds, food, water, ventilation and pop-hole operation daily.

Read more less

Timber shelter for ducks or geeseThe Appletons Duck or Goose Shelter offers birds a sheltered place to nest and take daytime refuge from the elements in a backyard or paddock. Its raised timber design includes a ramp, ventilation holes and a large pop-hole so birds can come and go.Lift one roof panel to check inside, and remove the plywood floor for cleaning. Supplied as a professionally built kitset with pre-built panels and easy-to-follow instructions, the shelter is flat-packed for assembly.Dimensions and model options Both models: 1m long × 1m wide × 0.85m high to the roof apex. Leg height: 10cm, included in the overall height. Duck House option: duck-sized pop-hole. Goose House option: larger pop-hole for geese. The only stated difference between the two shelters is the pop-hole size, not the overall house dimensions. Entrance height and width can be customised to suit your birds; discuss your requirements with Appletons before ordering. Allow additional space for the ramp and opening the roof panel.Features and inclusions Professionally built timber kitset with assembly instructions. H4-treated timber and H3.2-treated plywood. Raised shelter on sturdy legs. Removable plywood floor. Ventilation holes in the front panel. Apex-style plywood roof with one lift-up panel for internal access. Ramp supplied. Large pop-hole for birds to enter and leave. Daytime shelter rather than enclosed night housingThis shelter provides refuge and nesting accommodation with an open entrance. It should not be treated as a securely enclosed nighttime house. If you need closable accommodation for ducks at night, consider the Appletons Cubby Duck House, which offers a closable pop-hole and full access door.Materials and finishAppletons' standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood, thicker flooring or alternative materials. These changes involve additional cost and should be agreed before manufacture.Made to order and assemblyTimber housing is made to order, with production booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity. Delivery time is additional.Pre-built panels are supplied flat-packed with model-specific assembly instructions. Plan for two-person assembly on level ground and follow the supplied instructions.Positioning and careChoose a level, well-drained site and position the shelter to reduce exposure to prevailing wind and rain while retaining ventilation. Keep the entrance and ramp clear, and check stability when repositioning the shelter.Keep bedding dry and remove damp or dirty material regularly. Use the lift-up roof panel for access and the removable floor for cleaning. Cleaning frequency depends on your birds, bedding and weather conditions; follow cleaning-product labels.The timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Check fixings and moving parts regularly, maintain the roof and timber finish, and repaint or restain as needed. Service life depends on maintenance and exposure.

Read more less

Freestanding timber walk-in poultry runThe Appletons Freestanding Walk-In Poultry Run provides a dedicated outdoor enclosure with person-sized access for feeding, cleaning and caring for your birds. Choose an open top, an enclosed mesh top or a solid corrugated roof with mesh beneath to suit your setup.Timber-framed welded-mesh panels give hens space for scratching and foraging, while the large access door makes daily flock care easier. This is a run rather than a hen house; provide suitable sleeping and nesting accommodation separately.Dimensions Width: 2.4m. Length: 2.4m. Height: 1.9m. Footprint: 5.76 square metres. Allow additional clearance for the access door and any attached hen house. Suitable flock size depends on bird size, time spent confined, free-range access and the space occupied by accessories; no numerical bird capacity is specified for this model.Construction and standard features Four timber-framed wire-mesh side panels. Hot-dip galvanised square-welded mesh with 13mm square openings and 1mm wire gauge. H4-treated timber and H3.2-treated plywood components. Professionally built kitset with pre-built panels and easy-to-follow assembly instructions. One panel incorporates a large person-sized access door; the door panel can be positioned on any side. Door latch accessible from either side for practical entry and exit. Top and roof choices Open top: side enclosure without top panels. This does not provide overhead containment or protection. Mesh roof: welded-mesh top panels complete the overhead enclosure while retaining light and airflow. Mesh does not provide rain cover. Galvanised corrugated roof with mesh beneath: solid overhead cover for shade and rain protection, with welded mesh below the iron and flashing at each end. Colorsteel corrugated roof with mesh beneath: an alternative roof finish with the underlying mesh enclosure. Solid roofing has a slight gradient to allow water runoff. A rolled gutter is an optional addition to help collect runoff. The top or roof supplied depends on the option ordered; a solid roof and gutter are not standard inclusions with the open-top run.Optional access modifications and accessories Closable chicken pop-hole: lets hens move between the run and free-range space. It opens and closes and can be locked at night. Tell Appletons where you want it positioned. Easy-care drinker slot: allows a compatible drinker to be refilled from outside and reduces the space it occupies inside the run. The drinker is an accessory, not a standard run inclusion. Hen-house connection: a panel can be modified to provide access to your hen house or coop. Discuss the layout before ordering. Raised Deluxe Hen House: can be combined with this run as an optional, separately purchased housing addition. Pop-holes, drinker slots, gutters, hen houses, drinkers and enrichment accessories shown in example setups should not be assumed to be included. Agree on the required modifications and any additional cost before manufacture.Other enclosure usesWith a fully enclosed top, Appletons also offers this run for pheasants, guinea fowl, quail, small aviary birds and rabbits, or as a catio. Check suitability for the particular species, age and size of your animals, including mesh openings, ground-level gaps, digging or climbing behaviour and shelter requirements.Containment and positioningWelded mesh and an enclosed top help restrict access and contain birds, but no enclosure should be treated as a guarantee against every predator. Open-top and enclosed-top options provide different levels of containment. Check doors, latches, panel joins and ground-level gaps regularly.Assemble on level, well-drained ground and consider wind exposure, shade, drainage and access for daily care. Provide appropriate shelter, food, clean water and enrichment for the animals housed. A solid roof offers overhead weather cover but the mesh sides remain exposed to wind and wind-driven rain.Made to order and assemblyAppletons timber housing is made to order, with production booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional.The kitset uses pre-built panels supplied flat-packed with model-specific instructions. Plan for two-person assembly on level ground and follow the supplied instructions for the selected top or roof configuration.Materials and maintenanceAppletons' standard timber housing uses rough-sawn timber and C-D grade structural plywood where plywood components are required. Practical timber finishes can include knots, minor splits, filler and treatment marks. Ask before ordering about alternative materials or finishes; changes may involve additional cost.The timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Inspect timber, mesh, fixings, hinges and latches regularly, maintain moving parts and repair damage promptly. Repaint or restain as needed.For galvanised or Colorsteel roofing, wash with potable water as appropriate in coastal or salty conditions. Keep gutters clear if fitted. Service life depends on maintenance and exposure. Keep the run floor clean and well drained, remove accumulated waste and damp bedding, and follow cleaning-product labels.

Read more less

Extended timber walk-in poultry runThe Appletons Freestanding Walk-In Extended Poultry Run offers a long outdoor enclosure for poultry with full-height access for feeding, cleaning and daily care. Choose an open top, enclosed mesh top or corrugated roof with mesh underneath to suit your setup.The timber-framed mesh sides provide visibility and airflow, with space inside for scratching, foraging and enrichment. This is a poultry run rather than a hen house; suitable sleeping and nesting accommodation is supplied separately.Dimensions Length: 4.8m. Width: 2.4m. Height: 1.9m. Allow extra space for the access door to open and for any connected hen house. No numerical flock capacity is specified. Suitable stocking depends on bird size, time spent confined, free-range access and the room occupied by equipment.Construction and standard features Six timber-framed wire-mesh side panels. Hot-dip galvanised square-welded mesh with 13mm square openings and 1mm wire gauge. H4-treated timber and H3.2-treated plywood components. Professionally built kitset with pre-built panels and easy-to-follow assembly instructions. One panel incorporates a full-height person-sized entry door; the door panel can be positioned on any side. Latch accessible from either side for practical entry and exit. Top and roof options Open top: side enclosure without overhead panels. This option does not provide overhead containment or cover. Mesh roof: rigid welded-mesh top panels complete the overhead enclosure while retaining airflow and light. Mesh does not provide rain cover. Galvanised corrugated roof with mesh beneath: solid overhead cover for shade and rain protection, with mesh underneath and flashing at each end. Colorsteel corrugated roof with mesh beneath: an alternative solid-roof finish with the underlying mesh enclosure. Solid roofing has a slight gradient for water runoff. A rolled gutter can be added to help collect runoff. The supplied top or roof depends on the option ordered; a solid roof and gutter are not standard inclusions with the open-top run.Optional modifications and accessories Closable chicken pop-hole: provides access to free-range space and can be opened, closed and locked at night. Tell Appletons where you want it positioned. Easy-care drinker slot: accommodates a compatible drinker that can be refilled from outside, reducing the space it occupies inside the run. Hen-house connection: a panel can be modified, as an optional extra, to accommodate access to your hen house or coop. Discuss the layout before manufacture. Rolled gutter: optional addition for a solid-roof setup. Drinkers, hen houses, perches and other enrichment accessories shown in example setups are not standard run inclusions. Pop-holes, drinker slots and connection modifications are optional extras. Confirm your selected configuration and additional costs before ordering.Enclosed-top usesWhen fully enclosed with top panels, Appletons also offers this run for pheasants, guinea fowl, quail, aviary birds and rabbits. Check suitability for the species, size and age of your animals, including mesh openings, ground-level gaps, digging behaviour and shelter requirements.The small mesh openings help restrict access by small wild birds when the run is fully enclosed and joins and entrances are kept closed. This is not a guarantee against every bird, pest or predator, and the open-top version offers different containment from enclosed-top options.Positioning and daily careAssemble on level, well-drained ground and consider wind exposure, shade, drainage and access for feeding and cleaning. Provide suitable shelter, clean water, food and enrichment. A solid roof offers overhead weather cover, but mesh sides remain exposed to wind and wind-driven rain.Inspect doors, latches, mesh, panel joins and ground-level gaps regularly. Enclosed roofing helps contain animals and restrict overhead access, but should not be treated as an absolute predator-proof guarantee. Check the setup against the needs of your animals and local conditions.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional.The kitset is supplied flat-packed using pre-built panels with model-specific instructions. Plan for two-person assembly on level ground and follow the instructions for your selected top or roof configuration.Materials and maintenanceAppletons' standard timber housing uses rough-sawn timber and C-D grade structural plywood where plywood components are required. Practical timber finishes may include knots, minor splits, filler and treatment marks. Ask before ordering about alternative materials or finishes; changes may involve additional cost.Timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Check timber, mesh, fixings, hinges and latches regularly, maintain moving parts and repair damage promptly. Repaint or restain when needed.For galvanised or Colorsteel roofing, wash with potable water as appropriate in coastal or salty conditions and keep any fitted gutter clear. Service life depends on maintenance and exposure. Keep the run floor clean and well drained, remove accumulated waste and damp bedding, and follow cleaning-product labels.

Read more less

Walk-in timber bird aviaryThe Appletons Walk-In Bird Aviary combines sheltered timber housing with a galvanised welded-mesh front window for light and ventilation. A person-sized door gives you access for feeding, cleaning and caring for your birds, with an optional enclosed security entry to help reduce escape risk during entry and exit.Appletons offers this aviary for budgies, lovebirds, canaries, finches, cockatiels, doves, pigeons, quail and other small birds. Choose birds and stocking levels according to their size, compatibility, exercise and shelter needs; no numerical bird capacity is specified.Dimensions Main aviary: 2.4m long × 1.2m deep × 1.8m high at the front. Optional security entry: 1.2m wide × 1.2m deep. The security entry is additional to the main aviary. Allow room for door operation and access for cleaning. The person door and optional security entry can be positioned at either end; discuss your preferred layout before ordering.Construction and standard features Professionally built kitset using pre-built panels with easy-to-follow assembly instructions. H4-treated timber and H3.2-treated plywood. Skid base for relocation. Solid plywood floor for a sheltered interior. Galvanised corrugated iron roof with matching flashing at each end. Galvanised square-welded mesh window in the front panel for ventilation and light. Person-sized access door. Welded mesh beneath the corrugated roof profile as a standard feature to help restrict access through roof-profile openings. The solid walls, floor and roof provide shelter, while the mesh front retains airflow. Check the assembled aviary, joins and closures regularly; the design should not be treated as a guarantee against every pest or predator.Aviary-only and security-entry optionsChoose Aviary Only for the main timber aviary, or Aviary + Security Door Entry to include the enclosed mesh-and-timber entry section shown in the example setup.With the security entry, first step into the enclosed entry and close its outer door behind you before opening the aviary's inner plywood door. Keep one door closed while using the other. This double-door arrangement helps reduce the chance of birds escaping, but still requires careful handling and checks of doors and latches.Optional roof and gutter upgradesThe standard roof is galvanised corrugated iron. Ask about upgrading to a matching Colorsteel Endura roof if you want the aviary to coordinate with other buildings. Confirm available colours and additional cost before manufacture.A rolled rear gutter can be added as an optional extra. It covers the exposed rear corrugated edge and helps guide water towards the gutter ends rather than along a dripline. The gutter is not listed as a standard inclusion.Interior fittings are not includedPerches and nesting boxes are not supplied. You will need to provide and install suitable fittings for your birds, along with appropriate feeding, drinking and enrichment equipment. Interior accessories and painted decoration shown in personalised customer examples should not be assumed to be included.When not used for birds, the aviary can also serve as a storage or garden shed.Positioning and assemblyChoose a level, well-drained site. Position the solid walls towards prevailing wind and rain and consider facing the mesh front towards the sun, while providing appropriate shade and ventilation for the birds. Leave clear space for the person door and security entry, if selected.The kitset is supplied flat-packed using pre-built panels and model-specific instructions. Plan for two-person assembly on level ground. Check stability, joins and door operation after assembly or relocation.Made to orderAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional. Agree on the entry layout and any roof or gutter upgrades before manufacture.Materials, cleaning and maintenanceAppletons' standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. Ask before ordering about alternative materials or finishes, which may involve additional cost.The timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Check timber, mesh, fixings, hinges and latches regularly, maintain moving parts and repair damage promptly. Repaint or restain as needed.Wash galvanised or Colorsteel roofing with potable water as appropriate in coastal or salty conditions, and keep any fitted gutter clear. Service life depends on maintenance and exposure.Remove droppings, wasted feed and damp bedding regularly, keep food and water equipment clean and follow cleaning-product labels. Use the person-sized door for access, taking care to maintain containment while cleaning. Check birds, ventilation and door closures daily.

Read more less

Apex walk-in timber rabbit houseThe Appletons Apex Rabbit House provides sheltered timber accommodation for rabbits or guinea pigs, with a person-sized door for daily care and a closable bunny pop-hole for animal access. A solid plywood floor and corrugated roof create a sheltered interior, while front mesh windows and adjustable external shutters let you manage airflow and exposure to the weather.Available in Standard and Large sizes, this professionally built kitset can be customised to suit your setup. Choose the size according to your animals' needs and their access to additional exercise space rather than treating the house dimensions as a fixed animal-capacity rating.Two sizes Standard: 2.4m long × 1.2m deep, with an internal apex height of 1.8m and external height of 2m. Large: 2.4m long × 1.8m deep, with an internal apex height of 1.8m and external height of 2.2m. Allow additional space for opening the person door and shutters, and for any connected outdoor run or tunnel system. Photos include both sizes and customised examples; order the size and upgrades you require.Standard features and inclusions Professionally built kitset with pre-built panels and easy-to-follow assembly instructions. H4-treated timber and H3.2-treated plywood. Skid base for towing and relocation. Solid plywood floor. Galvanised corrugated iron roof with matching ridge capping and side flashings. Rolled gutter on the front mesh-window side. Person-sized door for access and cleaning. One standard closable rabbit pop-hole, positioned where required by agreement before manufacture. Two galvanised square-welded mesh windows above the front panel for ventilation and light. Two removable external timber shutters that can be opened or closed according to weather conditions. Use the shutters to reduce exposure to wind and rain or open them for additional light and ventilation. Retain appropriate airflow for your animals; shutters are not a substitute for checking conditions inside the house.Rabbit access and outdoor exercise optionsThe standard bunny pop-hole can be positioned to suit your layout. The front panel beneath the mesh windows is the preferred position; let Appletons know your requirements when ordering.A Zippi Door Frame Access Point can be requested instead of the standard pop-hole to connect the house to a compatible Omlet Zippi tunnel system. Tunnels can link the house to separately purchased runs or playpens. Discuss the connection position, compatibility and additional cost before manufacture.Tunnels, outdoor runs, platforms and playpens are optional accessories, not standard house inclusions. Plan suitable exercise space and a secure connection for your animals.Optional roof, window and gutter upgrades Colorsteel Endura roof: request a colour to coordinate with other buildings, subject to available colours and additional cost. Galvanised corrugated iron is the standard roof finish. Additional rolled gutter: the front gutter is included; a second gutter can be added on the rear roof edge. Discuss galvanised or colour-matched options. Perspex windows: front-panel window customisations can be discussed before ordering. Roofing paper and hexagonal mesh: optional installation beneath the roofing iron. Roofing paper provides a backup roof membrane and helps manage underside condensation, air movement, dust and dirt in the roof space. Custom interiors and customer examplesAsk Appletons about interior customisation before ordering. Photos show special-order and customer-modified houses, including extra headroom, larger perspex windows, tunnel connection points, internal ramps, upper platforms, plywood lining and modified shutters.These features are not standard inclusions. Customer-added insulation, decorations and interior fittings should not be assumed to come with the house. Confirm each requested modification and its cost before manufacture.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional.Pre-built panels are supplied flat-packed with model-specific instructions. Plan for two-person assembly on level ground and follow the supplied instructions. Confirm pop-hole placement, connection points and upgrades before the house is built.Positioning and daily careChoose level, well-drained ground and consider prevailing wind, rain, shade and access for cleaning. Leave room for doors and shutters to operate. Check stability and door operation after relocating the house.Provide suitable bedding, hiding places, food, clean water and exercise space for your animals. Check interior temperature, ventilation, closures and animal wellbeing daily. Inspect timber and fittings for chewing or damage and repair promptly; the housing should not be treated as a guarantee against every predator or escape risk.Materials and maintenanceAppletons' standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. Ask about alternative materials or finishes before ordering; changes may involve additional cost.Timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Check fixings, hinges, shutters and moving parts regularly, maintain moving parts and repaint or restain when needed. Service life depends on maintenance and exposure.Wash galvanised or Colorsteel roofing with potable water as appropriate in coastal or salty conditions, and keep gutters clear. Remove droppings and damp bedding regularly, keep the floor dry and follow cleaning-product labels. The person-sized door makes access for routine care and cleaning straightforward.

Read more less

Timber stock shelter on skidsThe Appletons Stock Shelter provides an open-front refuge for calves, sheep, goats and dogs. Solid timber-and-plywood walls and a corrugated roof offer shade and help reduce exposure to rain and wind, while the open front allows animals to come and go.Built on skids for towing around the paddock, this professionally built kitset can be repositioned as your shelter needs change. It is a shelter rather than a fully enclosed house, so positioning matters, especially in wind-driven rain.Dimensions Length: 2.4m. Depth: 1.2m. Height: 1.3m to the front of the roof. Choose the shelter according to your animals' size and space requirements. No numerical stock capacity is specified. For taller animals such as alpacas, ask Appletons about a custom-built taller shelter; extra height is not part of the standard model.Standard features and inclusions Professionally built kitset with pre-built panels and easy-to-follow assembly instructions. Skid base for towing and relocation. H4-treated timber and H3.2-treated plywood. Solid plywood floor. Galvanised corrugated iron roof with matching flashings at each end. Open-front layout for animal access. Optional roof and gutter upgradesThe standard roof and flashings are galvanised corrugated iron. A Colorsteel Endura roof upgrade can be requested to coordinate with other buildings. Discuss available colours and additional cost before ordering.A rolled gutter can also be added as an optional extra, in galvanised iron or a colour-matched finish by agreement. It covers the exposed corrugated edge and helps guide water towards the gutter ends rather than along a dripline. A gutter is not listed as a standard inclusion.Dog-shelter use and customer examplesThis shelter can also provide an open-front refuge for large dogs where its dimensions suit them. Customer photos show a shelter modified with castors for easier movement. Those castors were added by the customer and are not standard inclusions; the supplied shelter uses skids.PositioningChoose level, well-drained ground and position the solid walls to protect against prevailing wind and rain. Consider facing the open front towards the sun while ensuring appropriate shade and comfort in warm weather. Keep the entrance clear and allow animals enough space to enter, rest and leave.The roof and walls provide weather shelter, but the open front does not keep out all wind or rain. Check the shelter and ground conditions regularly, and check stability after relocation.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional.Pre-built panels are supplied flat-packed with model-specific instructions. Plan for two-person assembly on level ground and follow the supplied instructions. Agree on custom height, roof colour or gutter additions before manufacture.Materials and finishAppletons' standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood, thicker flooring or alternative materials. These changes may involve additional cost.Cleaning and maintenanceKeep bedding and the plywood floor dry, remove droppings and damp material regularly, and clean according to use and conditions. Follow cleaning-product labels. Inspect the floor, timber, fixings and roof for damage or wear and repair promptly.Timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Repaint or restain when needed and check fixings regularly. Service life depends on maintenance and exposure.Wash galvanised or Colorsteel roofing with potable water as appropriate in coastal or salty conditions and keep any fitted gutter clear.

Read more less

Mini timber stock shelter on skidsThe Appletons Mini Stock Shelter offers compact sheltered accommodation for animals that suit its dimensions. Solid plywood walls, a plywood floor and a corrugated roof provide shade and help reduce exposure to rain and wind, with an entrance on the left-hand side of the front panel for easy access.The skid base allows relocation around the paddock. Unlike the wider Stock Shelter, this compact model has a partly enclosed front rather than a fully open frontage. It is a shelter, not a closable animal house.Dimensions Length: 1.2m. Depth: 1.2m. Height: 1.3m to the front of the roof. Check the shelter dimensions and entrance suitability against the size and needs of your animals before ordering. No numerical animal capacity or entrance measurement is specified. Ask Appletons about a custom-built taller shelter for animals such as alpacas; additional height is not included in the standard Mini model.Standard features and inclusions Professionally built kitset with pre-built panels and easy-to-follow instructions. H4-treated timber and H3.2-treated plywood. Skid base for towing and relocation. Solid plywood floor. Four side panels, including the front panel with its left-side opening. Galvanised corrugated iron roof with matching flashings at each end. Optional upgrades Colorsteel Endura roof: request a matching roof colour to coordinate with other buildings, subject to available colours and additional cost. Galvanised corrugated iron is the standard roof finish. Rear rolled gutter: an optional addition that covers the exposed rear corrugated edge and helps guide water towards the gutter ends rather than along a dripline. Towing lugs: optional lugs to make towing and relocation easier. The rear gutter and towing lugs are optional additions, not standard inclusions. Confirm the required upgrades and any additional cost before manufacture.Positioning and useChoose level, well-drained ground and position the solid walls towards prevailing wind and rain. Keep the entrance clear, allow space for animals to enter and leave, and consider shade and ventilation in warm weather.The roof and walls offer weather shelter, but the open entrance does not keep out all wind or rain. Check interior and ground conditions regularly, and check stability after relocation. Provide suitable bedding and daily animal care according to the animals using the shelter.Ordering and assemblyThe kitset uses pre-built panels with model-specific assembly instructions. It comprises a floor, four side panels and a roof. Plan for two-person assembly on level ground and follow the supplied instructions.Confirm current availability and dispatch timing with Appletons when ordering, particularly for custom roof finishes or other upgrades. Agree on requested modifications before manufacture.Materials and finishAppletons' standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood, thicker flooring or alternative materials. Changes may involve additional cost.Cleaning and maintenanceKeep bedding and the plywood floor dry, remove droppings and damp material regularly, and clean according to use and conditions. Follow cleaning-product labels. Inspect the floor, timber, fixings and roof for damage or wear and repair promptly.Timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Repaint or restain when needed and check fixings regularly. Service life depends on maintenance and exposure.Wash galvanised or Colorsteel roofing with potable water as appropriate in coastal or salty conditions, and keep any fitted gutter clear.

Read more less

Timber goat shelter on skidsThe Appletons Goat Shelter gives goats a sheltered place to rest out of wind and rain. Solid plywood walls, a plywood floor and a corrugated roof provide cover, while the front entrance allows goats to come and go. A square-welded mesh window above the plywood front panel adds light and ventilation.Built on skids for relocation around the paddock, this professionally built kitset is available with a plain finish or optional batten detailing. Choose the setup to suit your goats and paddock layout.Dimensions Length: 2.4m. Depth: 1.2m. Height: 1.3m to the front of the roof. Check these dimensions against your goats' size and space requirements. No numerical goat capacity or entrance measurement is specified. Allow clear space around the entrance so animals can enter and leave comfortably.Standard features and inclusions Professionally built kitset with pre-built panels and easy-to-follow assembly instructions. Skid base for towing and relocation. H4-treated timber and H3.2-treated plywood. Solid plywood floor. Galvanised corrugated iron roof with matching flashings on each side. Front access opening beside the plywood front panel. Square-welded mesh window above the front panel for additional light and airflow. Slide-out entrance doorstop/bedding-retaining board to help keep wood shavings, hay or other bedding inside. Plain or batten-detail optionChoose Shelter for the plain version or Shelter with Batten Detail for the decorative timber batten finish shown in some photos. Batten detailing is an optional finish, not an inclusion with the plain shelter. Painted customer examples do not establish that the shelter is supplied painted.Optional entrance-board modificationAsk Appletons about the entrance-board modification for situations where young stock or lambs with their mothers need temporary containment. Boards can be stacked to the required height, using finger holes for handling, and hung behind the shelter when not in use.This multi-board modification is distinct from the standard slide-out bedding-retaining board. Confirm its suitability for your animals, requirements and additional cost before manufacture. Check containment and animal wellbeing regularly rather than treating the boards as a guarantee of security.Optional roof and rear gutter upgradesThe standard roof and flashings are galvanised corrugated iron. A Colorsteel Endura roof upgrade can be requested to coordinate with other buildings. Discuss available colours and additional cost before ordering.A rolled rear gutter is an optional addition, with galvanised or colour-matched options by agreement. It covers the exposed corrugated edge and helps guide water towards the gutter ends rather than along a dripline. A rear gutter is not listed as a standard inclusion.Goat Shelter versus Pig ShelterThe Goat Shelter does not have a rear door. The Appletons Pig Shelter has rear-door access. Do not assume rear access is included with this model when planning cleaning and positioning.Positioning and daily careChoose level, well-drained ground and position the solid walls towards prevailing wind and rain. Consider facing the entrance towards the sun while ensuring appropriate shade and airflow in warm weather. Keep the entrance clear and check stability after relocating the shelter.The roof and walls offer weather shelter, but the open entrance does not keep out all wind or rain. Keep bedding dry, check interior conditions and provide daily animal care appropriate to your goats. Inspect timber and fittings for damage, chewing or rubbing and repair promptly.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional.The kitset uses pre-built panels supplied flat-packed with model-specific instructions. Plan for two-person assembly on level ground and follow the supplied instructions. Agree on the finish, roof colour, gutter or entrance modifications before manufacture.Materials and maintenanceAppletons' standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. Ask before ordering about alternative materials or finishes; changes may involve additional cost.Timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Check fixings and the slide-out board regularly, maintain moving parts and repaint or restain as needed. Service life depends on maintenance and exposure.Remove droppings and damp bedding regularly, keep the plywood floor dry and follow cleaning-product labels. Wash galvanised or Colorsteel roofing with potable water as appropriate in coastal or salty conditions and keep any fitted gutter clear.

Read more less

Timber pig shelter on skidsThe Appletons Pig Shelter provides a sheltered resting place for pigs, with solid plywood walls and floor, a corrugated roof and an open front entrance. The roof offers shade and the walls help reduce exposure to wind and rain, while mesh above the front panel allows ventilation.A rear access door makes it easier to refresh bedding and check your pigs without relying solely on the front opening. Built on skids, this professionally built kitset can be relocated around the paddock as your setup changes.Dimensions Length: 2.4m. Depth: 1.2m. Height: 1.3m to the front of the roof. Check the dimensions against your pigs' size and space requirements. No numerical pig capacity or entrance measurement is specified. Allow clear space at the front opening and rear door for daily care and bedding changes.Standard features and inclusions Professionally built kitset using pre-built panels with easy-to-follow assembly instructions. Skid base for towing and relocation. H4-treated timber and H3.2-treated plywood. Solid plywood floor. Galvanised corrugated iron roof with matching flashings on each side. Rear-panel access door for checking pigs and refreshing bedding. Two secure bolts on the rear door. Slide-out entrance doorstop/bedding-retaining board to help keep bedding inside. Front opening for pig access beside the plywood front panel, with wire mesh above for ventilation. Optional roof and rear gutter upgradesThe standard roof and flashings are galvanised corrugated iron. A Colorsteel Endura roof upgrade can be requested to coordinate with other buildings. Discuss available colours and additional cost before ordering.A rolled rear gutter is an optional addition, in galvanised iron or a colour-matched finish by agreement. It covers the exposed corrugated edge and helps guide water towards the gutter ends rather than along a dripline. A rear gutter is not listed as a standard inclusion.Shelter rather than a complete containment penThis product is the Pig Shelter itself, with an open front entrance. It does not include the detachable pen shown with the separate Appletons Pigsty.If you need a shelter-and-pen setup, ask about the Pigsty. Appletons also offers a separate Farrowing Pigsty for sow-and-piglet housing. Do not assume the pen or farrowing-specific design is included with this shelter.Positioning and daily careChoose level, well-drained ground and position the solid walls towards prevailing wind and rain. Consider facing the open entrance towards the sun while ensuring suitable shade and airflow in warm weather. Keep both the front entrance and rear access door clear.The walls and roof provide weather shelter, but the open front does not keep out all wind or rain. Provide appropriate dry bedding, check interior conditions and animal wellbeing daily, and check stability after relocation.Inspect the rear-door bolts, bedding-retaining board, floor, timber and fixings regularly for damage or wear. Pigs can be hard on housing, so repair damage promptly and check closures before leaving the shelter.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional.The kitset uses pre-built panels supplied flat-packed with model-specific instructions. Plan for two-person assembly on level ground and follow the supplied instructions. Agree on roof colour, gutter additions or other requested changes before manufacture.Materials and finishAppletons' standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about dressed timber, higher-grade plywood, thicker flooring or alternative materials. Changes may involve additional cost.Cleaning and maintenanceUse the rear access door for bedding changes and routine checks. Remove droppings and damp material regularly, keep the plywood floor dry and clean according to conditions. Follow cleaning-product labels.Timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Maintain fixings, bolts and moving parts, and repaint or restain when needed. Service life depends on maintenance and exposure.Wash galvanised or Colorsteel roofing with potable water as appropriate in coastal or salty conditions, and keep any fitted gutter clear.

Read more less

Timber pigsty with shelter and enclosed penThe Appletons Pigsty combines covered sleeping accommodation with an enclosed timber-railed outdoor pen. The shelter offers a resting place out of sun, wind and rain, while the attached pen helps you manage pigs within a defined area rather than giving them unrestricted access to the paddock.A hinged front gate provides access to the pen, and a double-bolted rear person door gives access to the shelter for bedding changes and daily checks. Built on skids for relocation, the professionally built kitset uses pre-built panels and easy-to-follow instructions.Dimensions Overall: 3.6m long × 2.4m wide. Shelter: 1.2m deep × 2.4m wide × 1.3m high. Outside pen: 2.4m × 2.4m, with railings 1.2m high. Allow additional space for the front gate, rear door and access for relocation and cleaning.Suggested capacityAppletons describes this model as accommodating two medium-sized pigs or three small pigs, depending on breed. Treat this as a size-dependent guide, not a universal stocking limit. Consider the animals' actual size, compatibility, management and exercise needs when deciding whether the setup is suitable.Standard features and inclusions Covered timber shelter and enclosed timber-railed pen. Professionally built kitset with pre-built panels and assembly instructions. H4-treated timber and H3.2-treated plywood components. Skid base for towing and relocation around the paddock. Galvanised corrugated iron shelter roof with side flashings. Rear person-access door in the shelter, secured with two bolts. Solid timber deck with a slatted timber area to assist washing away muck. Hinged front gate in the pen for pig or person access, with two securing bolts. The slatted floor area supports cleaning, but waste still needs regular removal and management beneath and around the pigsty. It is not a self-cleaning system.Optional roof and rear gutter upgradesThe standard shelter roof and flashings are galvanised corrugated iron. Ask about a Colorsteel Endura roof upgrade to coordinate with other buildings. Confirm available colours and additional cost before ordering.A rolled rear gutter can be added as an optional extra to help manage runoff near the rear access door. It covers the exposed corrugated edge and guides water towards the gutter ends rather than along a dripline. Discuss galvanised or colour-matched options. A rear gutter is not a standard inclusion.Positioning and containmentChoose level, well-drained ground and position the shelter's solid walls towards prevailing wind and rain. Consider the direction of sunlight while providing appropriate shade and airflow in warm weather. Keep access routes to both the pen gate and rear door clear.The shelter provides weather cover; the outside pen remains open to the elements above its railings. Check gates, bolts, railings, flooring and joins regularly. Suitability of the rail spacing and height depends on your pigs' size and behaviour; do not treat the enclosure as an absolute escape-proof guarantee.Check stability after relocation and follow the supplied instructions for handling and moving the unit. Example towing photos demonstrate the skid-based design, not the inclusion of towing equipment.Made to order and assemblyAppletons timber housing is made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional.The kitset uses pre-built panels supplied flat-packed with model-specific instructions. Plan for two-person assembly on level ground and follow the supplied instructions. Confirm roof colour, gutter additions or other requested changes before manufacture.Materials and finishAppletons' standard timber housing uses rough-sawn timber and C-D grade structural plywood where plywood components are required. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about alternative timber, plywood grades or finishes. Changes may involve additional cost.Cleaning and maintenanceKeep shelter bedding dry, remove droppings and damp material regularly, and clean the deck and slatted area according to use and conditions. Use the rear door for bedding changes and shelter access. Follow cleaning-product labels and manage wash water and waste appropriately.Inspect flooring, railings, timber, fixings, hinges and bolts regularly for damage and wear, and repair promptly. Maintain moving parts and check closures before leaving the pen.Timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Repaint or restain as needed. Service life depends on maintenance and exposure.Wash galvanised or Colorsteel roofing with potable water as appropriate in coastal or salty conditions and keep any fitted gutter clear.

Read more less

Walk-in timber farrowing pigstyThe Appletons Farrowing Pigsty combines a spacious covered shelter with an enclosed timber-railed outdoor pen for sow-and-piglet accommodation. The taller shelter provides walk-in access for daily care, while solid walls, a plywood floor and a corrugated roof offer a sheltered resting area.A rear person door makes it easier to check the sow and piglets and refresh bedding. The outdoor pen has a hinged front gate and a timber deck with a slatted area to assist cleaning. Built on skids, the kitset can be relocated around the paddock.Dimensions Overall: 4.8m long × 2.4m wide. Shelter: 2.4m × 2.4m × 1.8m high. Outside pen: 2.4m × 2.4m, with railings 1.2m high. Allow extra room for the front gate, rear door, cleaning access and relocation. Check suitability against the sow's size, litter and management requirements; no numerical litter capacity is specified.Standard features and inclusions Covered shelter and enclosed timber-railed outside pen. Professionally built kitset with pre-built panels and easy-to-follow assembly instructions. H4-treated timber and H3.2-treated plywood. Skid base for towing and relocation. Solid plywood floor in the shelter. Galvanised corrugated iron shelter roof with matching flashings on each side. Person-access door in the rear panel for bedding changes and checks. Slide-out entrance doorstop/bedding-retaining board to help keep bedding inside the shelter. Pig access through the front of the shelter into the pen. Solid timber deck in the outside pen with a slatted timber area to assist washing away muck. Hinged front pen gate for pig or person access, with double-bolted securing. The shelter has a solid plywood floor, while the outdoor pen uses timber decking with a slatted section. The slatted area assists cleaning but does not make the pigsty self-cleaning; waste still requires regular removal and management.Optional roof and rear gutter upgradesThe standard shelter roof and flashings are galvanised corrugated iron. A Colorsteel Endura roof upgrade can be requested to coordinate with other buildings. Confirm available colours and additional cost before ordering.A rolled rear gutter is an optional extra to help manage runoff near the rear access door. It covers the exposed corrugated edge and helps guide water towards the gutter ends rather than along a dripline. Discuss galvanised or colour-matched finishes. The gutter is not a standard inclusion.Planning sow-and-piglet accommodationThis model provides a shelter-and-pen structure. Plan suitable bedding, ventilation, feeding, watering and any additional piglet-care equipment according to your animals and conditions. Do not assume specialist internal farrowing fittings or heating equipment are included unless separately agreed with Appletons.Check the suitability of rail spacing, entrances and floor details for the sow and piglets before use. The enclosure is not an absolute escape-proof guarantee, and housing alone does not replace regular farrowing supervision and animal care.Positioning and accessChoose level, well-drained ground and position the shelter's solid walls towards prevailing wind and rain. Consider sunlight, shade and airflow, and keep the front gate and rear door accessible for daily checks and bedding changes.The covered shelter offers weather protection, but the outside pen remains open above the railings. Maintain dry bedding and monitor conditions inside rather than relying on an all-weather warmth guarantee. Check stability after relocation and follow the supplied handling instructions.Ordering and assemblyThe kitset uses pre-built panels supplied flat-packed with model-specific instructions. Plan for two-person assembly on level ground and follow the supplied instructions.Confirm current availability and dispatch timing with Appletons when ordering, particularly for roof upgrades or other custom requirements. Agree on requested modifications before manufacture.Materials and finishAppletons' standard timber housing uses 12mm C-D grade structural plywood and rough-sawn timber. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. This is practical animal housing rather than a furniture-grade finish.Ask before ordering about alternative timber, plywood grades, flooring or finishes. Changes may involve additional cost.Cleaning and maintenanceUse the rear door for shelter access and bedding changes. Remove droppings and damp bedding regularly, keep the plywood floor dry and clean the pen deck and slatted area according to use and conditions. Follow cleaning-product labels and manage wash water and waste appropriately.Inspect flooring, railings, timber, fixings, hinges, bolts and the slide-out bedding board regularly. Repair damage promptly, maintain moving parts and check closures before leaving the pen.Timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Repaint or restain as needed. Service life depends on maintenance and exposure.Wash galvanised or Colorsteel roofing with potable water as appropriate in coastal or salty conditions and keep any fitted gutter clear.

Read more less

Timber maimai with platform and covered shelterThe Appletons Maimai with Platform combines a walk-in covered shelter, full-length timber bench and open-front platform in one kitset structure. The covered rear area provides a sheltered place to sit and store gear, while the platform extends in front of the shelter.Solid walls on three sides and a corrugated roof help reduce exposure to wind and rain. The skid base allows relocation, and pre-built panels simplify assembly.Dimensions Overall: 2.4m long × 2.4m deep × 1.8m high to the front of the roof. Covered shelter: 2.4m × 1.2m × 1.8m high to the front of the roof. Front platform: 2.4m × 1.2m. Platform front and side panels: 1.2m high. Rear bench: runs the full 2.4m length of the maimai. Appletons describes the maimai as accommodating up to four adults. This is an occupancy guide, not a certified structural load rating or a guarantee that any particular activity is safe for a given number of occupants.Standard features and inclusions Professionally built timber kitset with pre-built panels and easy-to-follow assembly instructions. Walk-in covered rear shelter and front platform. Full-length timber bench at the rear. Person entry point to the platform. Galvanised corrugated iron roof with flashings at each end. Rolled front gutter. H4-treated timber and H3.2-treated plywood. Skid base for towing and relocation. Optional roof finish and camouflageThe standard roof finish is galvanised corrugated iron. Ask Appletons about a Colorsteel Endura roof upgrade in Karaka or Mist Green to coordinate with natural surroundings. Confirm current colour availability and additional cost before manufacture.Camouflage nets and brushwood can be added to personalise the exterior. They are not listed as standard kitset inclusions. Equipment and personal gear shown in example photos are not included.Weather shelter and placementThe covered area provides overhead cover and protection on three sides; the front platform is open above its panels. Weather protection depends on placement, wind direction and conditions, rather than an all-weather dryness guarantee.Choose a stable, level site with clear entry access. Confirm site suitability and any required support or securing arrangements with Appletons before installation. Check stability after relocation and follow the supplied handling instructions. Do not assume the skid base makes the structure suitable for unsupported placement over water.Made to order and assemblyAppletons timber structures are made to order. Production is booked after confirmation and payment. Manufacture generally takes 5–15 working days, subject to workshop capacity; delivery time is additional.Pre-built panels are supplied flat-packed with model-specific instructions. Plan for two-person assembly on level ground and follow the supplied instructions. Agree on roof colour and any requested modifications before manufacture.Materials and finishAppletons' standard timber structures use 12mm C-D grade structural plywood and rough-sawn timber. The higher-grade plywood face is placed outside; reverse-face knots, small splits, filler, minor blemishes and treatment marks may be present. This is a practical outdoor structure rather than a furniture-grade finish.Ask before ordering about alternative materials or finishes. Changes may involve additional cost.MaintenanceInspect the platform, bench, timber, roof and fixings regularly and repair damage promptly. Keep the floor and entry free of debris and check the structure after relocation or severe weather.Timber can be painted or stained. Uncoated timber naturally weathers towards silver-grey and may move or split over time. Repaint or restain when needed. Service life depends on maintenance and exposure.Wash galvanised or Colorsteel roofing with potable water as appropriate in coastal or salty conditions and keep the gutter clear.

Read more less