Poultry Drinkers

Recycle your plastic drink bottles with this clever little chick drinker! This clever little 2 piece drinker set is a must-have for raising chicks in a brooder or even suitable if raising chicks with their mum. Also ideal in aviaries with quail etc... No chance of accidental chick drownings, as the water tray is totally covered with just enough space for their beaks. There are 7 holes for chicks to drink from. The drinker is in 2 parts with a separable base and top which is threaded to cope with the most common style drink bottle threads (As seen in photo with 1.5 litre cola water bottle) Note: Bottle not included. The top can be totally removed so the unit can be thoroughly cleaned.

Read more less

Handy little drinker for hens and chicks. Simple and easy to use design. These can be mounted on the side of cage or brooder box. Drinking bottle 1L + drinking cup and bracket. Suitable for up to 3 adult chooks.  This great system allows for the bottle to be filled from the outside of your coop. Easy to clean and maintain. Recommended 5 to 10 ‘Day-old’ chicks per drinker.

Read more less

Very useful holder! Adjustable bottle holder suitable for 1L chick nipple drinker & 1L mini cup drinker. The drinking bottle holder is designed to be mounted on the wall. The product has 2 strong plastic (ABS) parts. A yellow wall connector can be connected by 3 screws. The black holder can be easily clipped to it. The holder is easy to adjust, in 8 steps, for the required height. An ideal product for chicks and poultry but also for rabbits for installation inside the cage or hutch. Note: Drinker sold separately

Read more less

Fits into the side of a bucket or water container. Multi-use chicken, quail & rabbit nipple drinker complete with extension elbow & seal.Ideal for making your own drinking system for your pets. This is a high flow, multi-directional nipple which allows water to flow in larger droplets than standard drinker nipples, even when pushed sideways unlike other nipples which only allow water through when push upwards thus making it easier for your pets to drink from with minimal effort.Just like all nipple drinkers, these must be fitted to a gravity water system, and are not suitable for mains pressure. Can be fitted to the side of a bucket/water container or in-line on your water pipe. Tips for training chooks onto nipples  The golden rule for teaching birds to use any type of new watering system like nipples is to remove all other sources of water! As long as they have what they are familiar with they will use it first and will never try something new. If their only choice is to drink from that new shiny metal thingy hanging under the pipe or bucket, it will only take one thirsty bird to try it and show everybody else where to get a drink. To teach your birds to use the nipples, remember the golden rule - remove all other sources of water! When installing the new nipple system, simply gather your chooks around and show them by tapping the nipples with your fingers which cause water to leak. That will get their attention and they learn very quickly. We recommend 1-3 chooks per nipple.

Read more less

This drinker fits directly into the side of a bucket or tank. We recommend approx. 1 drinker per 2 to 3 chickens. (e.g. a flock of 6 hens will require approx. 2 to 3 lubing cups). The drinker works on a similar principle to nipple drinkers, although is designed for use specifically for poultry and game (not rabbits or parrots that chew). The device requires a low-pressure gravity feed supply via a header tank, drum or bucket. (no greater than 400mm of head).  The elbow is designed to fit the drinker directly into the side of your own water supply bucket or tank.

Read more less

Use this one if you need to fit it through a wire cage or mesh coop. We recommend approx. 1 drinker per 2 to 3 chickens. (E.g. a flock of 6 hens will require approx. 2 to 3 lubing cups). The drinker works on a similar principle to nipple drinkers, although is designed for use specifically for poultry and game (not rabbits or mischievous parrots that like to chew). The device requires a low-pressure gravity feed supply via a header tank, drum or bucket. (no greater than 400mm of head).  The elbow is designed to fit the drinker through a wired cage or meshed coop which is easy to install with the supplied locking nut.   The size of black pvc hose required is 10mm to adapt your drinker system to your coop or aviary. Alternatively, the cups can be attached directly to any flat-sided container. Available in green - also got a few red!

Read more less